Permak Steam Generators are water tube steam generators that produce fast steam and do not have the risk of explosion due to the low water volume inside . The steam generator produces steam by burning the fuel, depending on the fuel burner on it. All necessary equipment is available for the burner and other accessories to work fully automatically on the generator.
Types with water pipes work on the principle that the water pumped into a water coil is heated around the coil and passed into the vapor phase.
In the production of Steam Generators , Steam Boilers and Economizer Systems , superior technologies and standards are used to meet the needs of our age. Our aim is to offer PERMAK ASSURANCE to the use of our valued customers, with a quality and technological structuring above the imported products. This new investment, which we believe will contribute to the country's economy and exports and set an example for similar productions, has already become one of the most important manufacturers in the world in STEAM GENERATION SYSTEMS . Our operations to establish a worldwide sales and service network in Steam Production Systems are carried out rapidly.
Since there is no water volume, they do not operate with low efficiency at low loads like Flame Smoke Tube Scotch Boilers. Therefore, they are more efficient.
Permak Steam generators do not have a placement limitation as there is no risk of explosion. Thus, it can be placed under buildings, even in the volumes where people work. Another important feature of these boilers is that they produce steam quickly. For this reason, another name for steam generators is "fast steam generators".
The advantages of Permak Steam generators over classic large water volume scotch boilers can be listed as follows:
Steam generator consists of main body (smoke channel), serpentine (pressurized body), burner, electrical control panel, feed water pump, separator, condensate tank and chimney sections.
In general, the serpentine consists of two intertwined spirals. The inlet and outlet openings of the spiral can be seen on the front cover.
The water, which has been treated by the water softener and is ready for use in the condensate tank, is pumped into the inlet of the serpentine by feed water pumps. With the start of the burner, the water in the serpentine evaporates, moves towards the outlet and reaches the outlet. The steam produced by controlling the pressure and temperature with the control devices on the outlet side is sent to the process by opening the main steam valve.
In fact, a steam generator is also a steam boiler.
Steam generators can be in the form of spiral water pipe, vertical water pipe, horizontal water pipe, a mixture of these or a low water capacity smoke pipe.
Steam generators are sold at different prices according to their capacity and type. Please contact our sales team so that we can give you a steam generator price suitable for your project .
Steam generators, which were previously preferred in areas such as hotels, laundry, small clothing workshops, food and chemical industry, have recently started to be preferred in cascade / sequential structure and in factories with higher steam requirements, when used together.
Steam, which is the indispensable infrastructure of the developing industry; Saturated steam at maximum capacity is ready for use in 3 minutes in steam generators, which respond to the search for cheap cost, maximum application of safety systems, no risk of explosion and being able to be placed in any place.
Steam Generators are units that operate with very low water volumes, producing steam without storing and sending it to the system in principle.
Since there is no water volume in steam generators, there is no risk of explosion. Therefore, there are no placement restrictions. Thus, under buildings, even in the volumes where people work.